Steam supply and Condensate return Manifolds
Steam distribution manifolds facilitate the distribution of steam to various user points, through Forged units with inbuilt Piston valves. Similarly condensate from these points can be collected through the condensate collection manifolds, consisting of trap with associated isolation and by-pass piston valves. Available in basic configurations of 4 stations/tracing lines, and multiples of 4 stations i.e.8, 12 and 16 tracing lines.
A standard steam distribution Manifold would consist of a Manifold with Strainer, Isolation Piston valve at the Inlet at the top and a Trap valve station at the bottom drain point.
A standard Condensate collection Manifold would consist of a Manifold with Intelligent Trap valve stations at the individual tracing lines.
Pressure rating PN50. MOC: Forged CS to A105, supplied as Standalone units or Complete with inlet valve and trap assembly at the bottom [Steam Distribution] and complete Trap assembly [Condensate collection].
A very effective way of distribution and collection allowing a clean environment devoid of cluster of pipes and equipments. Aesthetic appearance for the Plant, Easy identification and access to individual components in case of maintenance.
Adequate length and pitch of Manifolds ensure multiple racing lines can be joined/welded to the manifold without interference of any kind between individual lines above. As against compact length and pitch which causes interference and necessitates accommodating bends to avoid the interference and which is contra indicated.
.jpg)
1.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
